
Clifton block heaters
![]() | BH-B Wet & Dry Blockheater The BH-B is a compact multi purpose block heater that is suited for water 'wet' or glass beads 'dry' heating. Applications range from incubation to sterilisation. A low profile design housed in a resistant stainless steel case with wipe clean sloping control panel. Touch buttons to enter temperature and time values, and with indicators showing heating, alarm, time and set points. |
||||||||||||||||||||
|
Temperature range: Ambient to 100°C (Water), Ambient to 180°C (Glass beads) Sensitivity: +- 0.5°C @ 60°C Uniformity +- 0.3°C @ 60°C Control: Temperature, Temperature and Time or Two temperature set points Over temperature alarm at +4°C Timer: 0 -999 minutes Temperature resolution: 0.1°C Capacity: 0.5L
|
|||||||||||||||||||||
![]() | BH-DIG Digital Blockheater The BH-DIG Digibloc is a safe dry consistant method of heating using aluminium blocks. A low profile design housed in a resistant stainless steel case with wipe clean sloping control panel. Touch buttons to enter temperature and time values, and with indicators showing heating, alarm, time and set points. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Temperature range: Ambient +5 to 150°C Sensitivity: +- 0.1°C @ 60°C Uniformity +- 0.1°C @ 60°C Control: Temperature, Temperature and Time or Two temperature set points Memory setting for time and temperature Over temperature alarm at +4°C Cycle end Buzzer Timer: 0 -999 minutes Temperature resolution: 0.1°C
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() | BH-T Analogue Blockheater The BH-T Thermubloc is a thermostaically controlled heater that uses aluminium blocks. A low profile design housed in a resistant stainless steel case with wipe clean sloping control panel. An anologue dial is used to set temperature |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Temperature range: Ambient +5 to 120°C Sensitivity: +- 0.5°C @ 60°C Control: Analogue dial
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() | BH-M Blockheater for microplates The BH-M Thermuplate is a digitally controlled microplate heater. Suitable for skirted or unskirted 96 well microplates. A low profile design housed in a resistant stainless steel case with wipe clean sloping control panel. An anologue dial is used to set temperature |
|||||||||||
|
Temperature range: Ambient +5 to 100°C Sensitivity: +- 0.1°C @ 60°C Uniformity +- 0.1°C @ 60°C Control: Temperature, Temperature and Time or Two temperature set points Memory setting for time and temperature Over temperature alarm at +4°C Cycle end Buzzer Timer: 0 -999 minutes Temperature resolution: 0.1°C
|
||||||||||||
Last modified 01/01/08