Ismatec pumps and tubing
Ismatec Quality Pumps
Flanging tool Make your own flanges on PTFE tubing
Until further notice, the flanging tool is not available !

Flanging tool IC0043

Flanging tool IC 0043

Make your own sealing flanges for proper tubing connections.

  • incl. 1 heating tip each for tubing ID 0.3 mm, 0.5 mm, 0.8 mm
    and 1.5 mm
  • Mains connection:
    100 – 230 VAC / 50 – 60 Hz

Working principle :
The tubing is held in the tube holder while it is pushed over the heating tip of the flanging tool. Once the tubing tip is heated, it is pushed towards the base-plate for cooling down.

Ordering information Order No.
Flanging tool IC 0043
Tube holder IC 0044
   
Spare tips for flanging tool Order No.
for PTFE tubing with 0.4 mm ID IS 1077
for PTFE tubing with 0.5 and 0.8 mm ID IS 1076
for PTFE tubing with 1.5 mm ID IS 1075
   
Dimensions and weight  
Depth / Width / Height 31 x 130 x 71 mm (1.22 x 5.12 x 2.8 inches)
Weight 0.850 kg (1.87 pounds)

Last modified 05/03/09