Ismatec pumps and tubing
Ismatec Quality Pumps
Suction Shoe Gear Pumpheads for REGLO-Z / ZS drives

Suction shoe style model
Magnetically Coupled Suction Shoe Pumpheads


All pumpheads mentioned below are supplied with B-mount

Never use a gear pump with liquid containing solids !

  • Cavity Style pumpheads vs.
    Suction Shoe pumpheads
  • Differential / system pressure
  • Gear materials
  • Internal Bypass
  • General Information
    about pumpheads

    •  
    		Pump-head 180
    Pump-head 180
    with B-mount

    Pumpheads Z-181 Z-183 Z-183HC Z-186 Z-186P Z-186HC Z-1830 Z-1830 P
    Order No. MI 0007 MI 0008 MI 0310 MI 0006 MI 0312 MI 0309 MI 0131 MI 0280
    Flow rate (ml/min) max. 1) 210 420 420 85 85 85 460 460
    Flow rate (ml/min) min. 1) 2.1 4.2 4.2 0.85 0.85 0.85 4.6 4.6
    Differential pressure max. (bar) 2.8 2.8 2.8 1.4 2.3 1.4 5.2 5.2
    Gear material Graphite Graphite Graphite Graphite PEEK Graphite PPS PEEK
    Seals PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE
    Housing SS316 SS316 *) Hastelloy
    C276    		 SS316 SS316 *) Hastelloy
    C276    		 SS316 SS316
    System pressure, max. (bar) 21 21 21 21 21 21 22 22
    Operating temperature °C -46...+177 -46...+177 -46...+177 -46...+177 -46...+177 -46...+177 -46...+177 -46...+177
    Internal bypass No No No No No No No No
    Ports (internal thread) 1/8"-27NPT 1/8"-27NPT 1/8"-27NPT 1/8"-27NPT 1/8"-27NPT 1/8"-27NPT 1/8"-27NPT 1/8"-27NPT
      *) for corrosive
    media    		   *) for corrosive
    media
      Order Nos. for Spare Parts and Supplementary Parts
    Additional parts  
    Tubing adaptors 2) AR 0001 AR 0001 AR 0001-HC AR 0001 AR 0001 AR 0001-HC AR 0001 AR 0001
    Service kit 3) MI 0035 MI 0036 MI 0317 MI 0034 MI 0320 MI 0316 MI 0189 MI 0290
    Magnet 4) MI 0065 MI 0065 MI 0065 MI 0065 MI 0065 MI 0065 MI 0065 MI 0065

    Never use a gear pump system for media containing solids!

    Please note:
    1) Flow rate without differential pressure
    2) Each pumphead requires 2 tubing adaptors (for tubing with an ID of 6.4 mm [1/4"]).     Must be ordered separately.
    3) The service kit provides all spare parts in case that gears and seals require replacement
    4) The REGLO-Z Digital drive is supplied with the magnet mounted. These part numbers are just for spare magnets

    For more information about the following terms, just click on the word

  • REGLO-Z Digital drive
  • REGLO-Z drive
  • REGLO-ZS drive
  • Cavity style pump-heads
  • Overview Gear Pumps


    • Last modified 05/03/09