Search for Products

Ismatec pumps and tubing
Ismatec Quality Pumps
MCP-Z Standard
MCP-Z
Operating panel
Operating panel MCP-Z

Order No.
(for drive only)
ISM 405


> Operating Manual (PDF)
Interchangeable pump-heads
Gear pump-heads
Link to
Cavity style pumpheads
Suction Shoe style pumpheads
Flow rates 1 – 7241 ml/min (depending on mounted pump-head)
Operating panel- 6-button membrane key-pad
- LED display
Memory4 sets of operating parameters can be stored
Operating modes

- pumping by drive speed (rpm)
- pumping by flow rate (ml/min)
- dispensing by volume (ml)
- dispensing by time (0.1s up to 999hrs)
- dispensing by volume within a pre-set time
- interval dispensing by volume with a pause
- interval dispensing by time with a pause
- setting the number of dispensing cycles
- pause time setting (from 0.1s up to 999hrs)

Calibrating functions- for flow rate (ml/min)
- for dispensing volume (ml)
Motor speed60 – 6000 rpm
Speed settingdigital speed setting (resolution 1 rpm)
Speed control closed loop control for pressure independent speed
RS232 interfaces- RS232 "in"    - for operation controlling via PC
- RS232 "out" - for cascading up to 8 pumps
Analog inputSpeed control (0–5 or 0–10V / 0–20 or 4–20mA)
Analog outputSpeed monitoring (0–10VDC or 0–12 kHz)
Digital input (TTL level)Start/Stop, autostart
Differential pressure max. 5.2 bar / 75.4 psi (depending on pump-head)
Motor typeDC motor
Power consumption150 W
Power supply 115/230VAC; 50/60Hz
Protection ratingIP 30
Depth / Width / Height220 x 155 x 260 mm (8 2/3" x 6 1/10" x 10") (without pump-head)
Weight6.4 kg (14 lb) (without pump-head)
Accessories - foot switch
Special characteristicsThe rotation direction of Ismatec gear pumps is not reversible
 

Overview Gear Pumps

Last modified 22/07/14