Search for Products

Ismatec pumps and tubing
Ismatec Quality Pumps
Pulsefree Dispensing Pump with Excellent Repeatability !
Repetitive error (rel.)
<
<
0.5%
0.2%
0.1%
at
at
at
5 ml
20 ml
100 ml
 

REGLO-ZS Digital
Drive and pump-head are
separated from the control unit
by a 2 m long cable
Operating panel
REGLO-Z Digital Display

Order No.
(for drive only)
ISM 1143


> Operating Manual (PDF)

Interchangeable pump-heads
Gear pump-heads
Link to
Cavity style pumpheads
Suction Shoe style pumpheads
Flow rates 0.85 – 3200 ml/min (depending on mounted pump-head)
Operating panel - 6-button membrane key-pad
- LED display
Operating modes

- pumping by drive speed (rpm)
- pumping by flow rate (ml/min)
- dispensing by volume (ml)
- dispensing by time (0.1s up to 999hrs)
- dispensing by volume within a pre-set time
- interval dispensing by volume with a pause
- interval dispensing by time with a pause
- setting the number of dispensing cycles
- pause time setting (from 0.1s up to 999hrs)
- back-steps for drip-free dispensing

- reversible rotation direction (only for Cavity Style pumpheads)

Calibrating functions - for flow rate (ml/min)
- for dispensing volume (ml)
Motor speed 50 – 5000 rpm
Speed setting digital speed setting (resolution 1 rpm)
Speed control closed loop control for pressure independent speed
RS232 interfaces - RS232 "in"    - for operation controlling via PC
- RS232 "out" - for cascading up to 8 pumps
Analog output Speed monitoring (0–12 kHz)
Digital input (TTL level) Run/Stop, autostart
Differential pressure max. 5.2 bar / 75.4 psi (depending on pump-head)
Motor type DC motor
Power consumption 60 W
Power supply 100 – 230 VAC / 50 – 60 Hz
Protection rating IP 30
Depth / Width / Height 178 x 100 x 135 mm (7"x 3.9"x 5.3") = control unit
175 x 65 x 80 mm (6.9"x2.6"x3.2") = pump drive
Weight 1.2 kg (2.6 lb) = control unit
0.7 kg (1.5 lb) = pump drive
Accessories - foot switch
 

Last modified 22/07/14