Search for Products

Ismatec pumps and tubing
Ismatec Quality Pumps
REGLO-CPF Digital
Reglo-CPF with RH00 pump-head
REGLO-CPF Digital
with
RH00 pump-head
> Operating Manual (PDF)
Operating panel
Operating panel Reglo-CPF
Ordering Information
Drive ISM 321

Interchangeable pump-heads
Choose your pump-head from the table below...
Pumpheads Volume/ Rev. Flow rates
RH00 2.5 25 µl 0.1 to 45 ml/min
RH0 5 50 µl 0.2 to 90 ml/min
RH1 10 100 µl 0.4 to 180 ml/min
PUMP ANIMATION
 

Drive specifications

Flow rates 0.1 - 180 ml/min (depending on the pump-head)
Operating panel- 6-button membrane key-pad
- LED display
Operating modes

- pumping by drive speed (rpm)
- pumping by flow rate (ml/min)
- adjustable stroke volume
- dispensing by volume (ml)
- dispensing by time (0.1s up to 999hrs)
- dispensing by volume within a pre-set time
- interval dispensing by volume with a pause
- interval dispensing by time with a pause
- setting the number of dispensing cycles
- pause time setting (from 0.1s up to 999hrs)
- piston stroke back-steps for drip-free dispensing

- reversible rotation direction

Calibrating function- for flow rate (ml/min)
- for dispensing volume (ml)
Flow rate settingdigital flow rate setting, in Ál and ml
Speed range40 – 1800 rpm
Speed controlclosed loop control for pressure independent speed
RS232 interfacesRS232 "in"    - for operation controlling via PC
RS232 "out"  - for cascading up to 8 pumps
Digital input (TTL level)Run/Stop, autostart
Analog outputSpeed monitoring (09 kHz)
Differential pressuremax. 6.9 bar
Motor typeDC motor
Power consumption 50 W
Power supply 100 – 230 VAC / 50 – 60 Hz
Protection ratingIP 30
Depth / Width / Height250 x 100 x 135 mm
(9 4/5" x 4" x 5 3/10")
Weight2.1 kg (5 lb)
Accessories - foot switch
 
Overview piston pumps

Last modified 22/07/15