Specifications: |
| Characteristics | -
microprocessor controlled
- planetary drive with 8 actively
driven stainless steel rollers
- low pulsation
- high repeatability
on all channels
- paint finished stainless steel housing |
| Tubing
type |
- 2-stop color-coded tubing, 0.13 –
3.17 mm i.d. |
| Tube-bed | -
CA Click'n'go cassettes
- simple handling
- automatic occlusion setting
- defined and reproducible
occlusion conditions
- each channel allows individual tubing selection |
| Operating
panel | -
6-button membrane key-pad
- LED display
- MAX
key for fast filling or emptying the tubing system |
| Operating
modes | -
pumping by speed (rpm)
- stand-by mode — prevents tubing system
from drying out
- reversible rotation direction |
| Rotor
speed | -
0.4 – 45.0 rpm (IP)
- 0.11 – 11.25
rpm (IP-N) |
| Speed
setting |
-
in rpm, resolution 0.1 rpm (IP) or 0.03 rpm
(IP-N)
- in %, resolution 0.1%
(rpm) |
| Speed
control | closed
loop control for load independent speed |
| Analog
input | Speed
control (0–5 or 0–10V / 0–20
or 4–20mA) |
| Analog
output | Speed monitoring (0–10VDC) |
| Digital
inputs (TTL level) | Run/Stop,
rotation direction, autostart |
| Differential
pressure |
1.0
bar (14.5 psi) possible (depending on tubing
material);
small tubing diameters and/or cassettes
with pressure lever allow higher pressures |
| Motor
type | DC
motor |
| Power
consumption | 30
W |
| Power supply |
115/230VAC;
50/60Hz |
| Protection
rating | IP
30 |
| Dimensions/Weight | see
table above |
| Accessories |
- cassettes
- foot
switch |
| |
|
