Search for Products

Ismatec pumps and tubing
Ismatec Quality Pumps
REGLO Digital
Reglo Digital Multichannel Pump

Specification

Microprocessor controlled dispensing pump
Characteristics - compact multi-channel tubing pump
- for low-flow, multi-channel fluid transfer and
  dosing or filling applications
- 6, 8 and 12 roller rotors for lower pulsation
- 6 operating modes and calibration functions
- 5" RGB touchscreen
- controllable by WIFI or direct from PC

- MS/CA Click'n'go cassettes providing defined and
  reproducible occlusion conditions
Flow rates 0.0002 – 68ml/min (per channel)
Channels2 or 4
Motor typeBLDC motor with encoder
Speed control accuracy+/- 0.1%
Speed settingdigital speed setting, resolution 0.1 rpm
Display    5" capacitive RGB touchscreen
Remote control-USB
-RJ45
-25pin serial port
   
REGLO ICC
Reglo ICC

Specification

Independent Channel Microprocessor controlled dispensing pump
Characteristics - compact multi-channel tubing pump
- for low-flow, multi-channel fluid transfer and
  dosing or filling applications
- INDEPENDENT control of separate channels
- INDEPENDENT direction of flow on different channels
- 6, 8 and 12 roller rotors for lower pulsation
- 6 operating modes and calibration functions
- software included to allow control of up to 8 pumps at once
- MS/CA Click'n'go cassettes providing defined and
  reproducible occlusion conditions
- remote controllable via PC (USB)
Flow rates 0.0002 – 35ml/min (per channel)
Channels2, 3 or 4
Motor typeStepper motor
Speed controlResolution 0.01rpm
Speed settingdigital by rpm (0.01 resolution) or flowrate on individual channels
Operating panal    - 7-button membrane key-pad
- digital display showing individual channels flowrates/direction
Remote control- USB plus RS232 in/out for cascading upto 8 pumps
   
   
REGLO Miniflex
Reglo Miniflex

Specification

Single or Dual Channel Microprocessor controlled dispensing pump
Characteristics - compact 1 or 2 channel tubing pumps
- for low-flow to medium-flow fluid transfer and
  dosing or filling applications
- 3 roller rotors
- 6 operating modes and calibration functions
- 5" RGB touchscreen
- controllable by WIFI or direct from PC

- MasterflexdLive pumphead
Flow rates0.1 – 350 ml/min
Channels1 or 2
Motor typeBLDC motor with encoder
Speed control accuracy+/- 0.1%
Speed settingdigital speed setting, resolution 0.1 rpm
Display    5" capacitive RGB touchscreen
Remote control-USB
-RJ45
-25pin serial port

Last modified 03/01/20