Swiss designed pumps with a quality build and the best UK prices.
|
|
Microprocessor
controlled dispensing pump |
Characteristics |
-
compact multi-channel tubing pump - for low-flow, multi-channel
fluid transfer and dosing or filling applications
- 6, 8 and 12 roller rotors for extremely low pulsation
- 6 operating modes and calibration functions
- MS/CA
Click'n'go cassettes providing defined
and
reproducible occlusion
conditions - remote controllable via PC
(RS232) | Flow
rates |
0.001
68ml/min (per channel) |
Channels | 2
or 4 | Motor
type | DC
motor | Speed
control | closed
loop control for pressure independent speed |
Speed
setting | digital
speed setting, resolution 0.1 rpm | Operating
panal | -
6-button membrane key-pad - LED display |
Remote
control | -
RS232 "in" and "out" - digital input and analog
output |
|
|
|
|
.. |
Same
as REGLO Digital but |
Characteristics | -
no LED display - no calibration functions - only "Start/Stop",
"Speed" and "Direction" |
Flow rates | 0.002
68 ml/min (per channel) |
Speed setting | 2-digit
potentiometer, 1% steps | Remote
control | analog
interface (no RS232) |
|
|
|
|
... |
Same
as REGLO Digital but |
Characteristics | -
single-channel tubing pump - easy accessible tube-bed
- higher max. flow rate - no LED display - no calibration
functions - only "Start/Stop", "Speed" and "Direction"
| Flow
rates | 2.1
230 ml/min | Channels | 1 |
Speed
setting | 2-digit
potentiometer, 1% steps | Remote
control | analog
interface (no RS232) | |
|
|