Bennett Scientific Header- Cat Laboratory shakers and mixers page
UK Distributors of

Shakers & Mixers Shakers & Mixers

Laboratory Shakers and Mixers


Shakers

S50 Heavy duty wrist shaking action for up to 8 x 500ml flasks at 100 - 800 shakes per minute. Also features feed-back speed control, 60 minute timer and continous run mode £683.00
S20 Multi-use orbital shaker for 80 -1100 shakes per minute at 3mm amplitude. Also features feed-back speed control, 60 minute timer and continous run mode. Designed for use with S20E,S,V,U,R & T adaptors. £392.00
S20D As S20 but with digital display and timer. £460.00
S20E - Adaptor for single hand held vessels £ 48.00
S20S - 200x400mm platform with antislip mat for microplates, pertri-dishes etc. £ 78.00
S20V - Adaptor for either 4 Erlenmeyer flasks or round bottom flasks, up to 500ml each £117.00
S20U - Universal adaptor with two soft roller grips to hold Erlenmeyer flasks, flat bottom flasks or bottles etc. £177.00
S20R - Test tube adaptor for up to 36 tubes (max 16 mm o.d.), variable inclination from vertical to 45 degrees £167.00
S26 Horizontal shaking action, electronic feed-back speed control, 50-1100rpm, 3mm amplitude, 0-60min. timer, or continuous run mode. Designed for use with adaptors S25A, S25B, S25C,S25D and S25CL clamps. £1040.00
S25 Linear reciprocal shaking action, electronic feed-back speed control, 40-200rpm, 20mm amplitude, 0-60min. timer, or continuous run mode. Designed for use with adaptors S25A, S25B, S25C,S25D and S25CL clamps. £1040.00
S25A - Shaking adaptor for 6 Erlenmeyer Flasks at 250ml £128.00
S25B - Shaking adaptor for 4 Erlenmeyer Flasks at 500ml £114.00
S25C - Shaking adaptor for 2 Erlenmeyer Flasks at 1000ml £106.00
S25D - shaking adaptor for 4 separating funnels £181.00
S25CL - Erlenmeyer Flask clamps (25ml, 50ml, 100ml, 250ml , 500ml or 1000ml) £27.00
ST5 Bi-dimensional shaker, electronic feed-back speed control,10- 100rpm, oscillation angle at 3, 6 , 9 or 12 °, flat tray 420 x 350mm £523.00
ST5D As ST 5 but with digital display £590.00
ST3 Bi-dimensional shaker, electronic feed-back speed control, 3- 50rpm, oscillation angle at 3 or 6 °, flat tray 217 x 217mm £512.00
GM3 3D movement shaker, electronic feed-back speed control, 3- 50rpm, tilt angle at 3 or 6 °, flat tray 217 x 217mm, digital display & timer £559.00
SH26 Microproccessor controlled sheaker with heated platform ambient to 60°C, timer space for 4 microtitre plates. £1343.00
SH26.1 As SH26 but with RS232 interface £1473.00
SH26.2 As SH26 but with RS232 interface and up to 95°C £1792.00
SH26.3 As SH26 but for upto 48 Eppendorf tubes 1.5 or 2ml. £1533.00
SH26.4 As SH26 but with RS232 interface and for upto 48 Eppendorf tubes £1982.00
All prices are exclusive of VAT, packing and delivery

Vortex Mixers

VM2 Compact vortex mixer, 10x10cm for pulse or continous run. 400 - 2800rpm £202.00
VM3 Vortex mixer for pulsed run, 14x14cm, 400 -2800 rpm £202.00
VM4 Universal shaker for test, micro and centrifuge tubes, pulsed or continuous run, 100-2800 rpm, 0-60 minute timer £249.00
All prices are exclusive of VAT, packing and delivery

Horizontal Mixers

RM5-40 5 roller synchronous rocking and rotating tube mixer at 36 rpm £388.00
RM5-80V 5 roller synchronous rocking and rotating tube mixer for 10 -80 rpm £492.00
RM5-6 Slow speed 5 roller synchronous rocking and rotating tube mixer at 6 rpm £388.00
RM5-30V Variable speed 5 roller synchronous rocking and rotating tube mixer at 1 - 30 rpm £443.00
RM5K-30 5 roller synchronous rocking and rotating tube mixer at 30 - 32 rpm £364.00
RM5W-40 5 roller synchronous rocking and rotating tube mixer at 36 rpm with removable rollers £492.00
RM10W80v 10 roller synchronous rocking and rotating mixer, 10 - 80rpm removable rollers £923.00
RM10w30v 10 roller synchronous rocking and rotating mixer, 1 - 30rpm removable rollers £923.00
RT20 Rotating and swaying mixer for 20 test tubes (max 15mm o.d.) at 6rpm with exchangable tube holders £214.00
RT60 Rotating and swaying mixer for 60 test tubes (max 18mm o.d.) at 6rpm with exchangable tube holders £371.00
All prices are exclusive of VAT, packing and delivery


Overhead Laboratory Stirrers and Mixers

R100C This powerful stirring motor (150Ncm) is designed for laboratory and pilot-plant use providing a range of 50-2000rpm. An LCD displays details of speed, torque and time. It also features an adjustable 10.5mm chuck with hollow shaft, electronic feed-back speed control, soft start & stop, and both analogue and RS232 interfaces. For up to 200L (water). £1039.00
R100CL As R100c but for speeds 20 - 1100rpm at 250Ncm torque £1454.00
R100CT Powerful stirring motor (600Ncm) as above, except its lower speed range gives a higher torque allowing it to stir volumes up to 200L (water) at 10-500 rpm £1445.00
R100SD Powerful stirring motor (100Ncm) with speed range of 40-2000rpm. An LCD displays details of speed, torque and time. It also features an adjustable 10.5mm chuck ,soft start & stop and long-life brush motor. For upto 200L (water). £853.00
R80D A 100 watt motor provides a torque of 80N/cm and speed range of 20-700rpm It also features an adjustable 10.5mm chuck, electronic feed-back speed control, LCD speed display and soft start. For up to 150L (water). £717.00
R80PC As R80D but with RS232 £872.00
R50D The 85 watt motor provides a torque of 50N/cm and speed range of 50-1600rpm It also features an adjustable 10.5mm chuck, electronic feed-back speed control, LCD speed display and soft start. For up to 100L (water). £504.00
R50 As R50D but without LCD speed display £419.00
R18 A 85 watt motor provides 18 N/cm torque with a speed range of 110-2000rpm. It also features an adjustable 10.5mm chuck, electronic feed-back speed control, and soft start. For up to 50L (water). £333.00
R14 Laboratory stirrer with 40 watt for speeds of 100-2000rpm. It has a 4mm keyless chuck and electronic feed-back speed control. For up to 5L (water). £197.00
R2 Mini-stirrer, fixed speed 750rpm, 3 watt motor. For up to 2L (water). £120.00
R1 Hand held stirrer, battery operated, fixed speed 2500rpm. For use with disposable stirring rods or special stainless steel stirring blades. For upto 500ml (water). £87.00
Stainless Steel stirring rods and paddles available at £20 - £50 each, pedestal stands and other accessories also available.
Please call 01626 369990 or email us with your requirements
All prices are exclusive of VAT, packing and delivery

For a pdf brochure with more details on mixers and shakers please click here

For a pdf brochure with more details on overhead mixers and stirrer splease click here



Home Tubing About us Tubing Tubing Tubing Sterilistion Sterilisation Ultrasonics Sterilisation Plasticware Sterilisation Other ranges

Last modified 19/09/11